This is a modern minimalist front block with the most up to date features possible. It can be used to build Mini 'cockers or to make an Autococker with "Extended reach" where the front regulator is positioned further from the frame (we have timing rods and pump arms available for both).
It has an anti-rotation step that prevents the front block from rotating in use.
The LPR location is moved out just slightly to allow the use of a greater number of combinations of parts including the larger diameter LPR's and Three ways.
The LPR feed hole is move to the back so it's impossible to block off the flow and reduce performance by screwing in your LPR too far.
Comes with the o-ring needed to seal the front block to the body.
Available in Polished Raw (needs anodizing before use), Polished Black anodize finish and Matte Black anodized finish.
Photo's on gun or assembled are just for illustration and there are no other parts included.
RAW/UNANODIZED PARTS MUST BE ANODIZED BEFORE USE. Using RAW parts or assembling them without anodizing immediately VOIDS all warranty. RAW Parts are provided only for custom anodizing and not to provide a "silver" finish.
It has an anti-rotation step that prevents the front block from rotating in use.
The LPR location is moved out just slightly to allow the use of a greater number of combinations of parts including the larger diameter LPR's and Three ways.
The LPR feed hole is move to the back so it's impossible to block off the flow and reduce performance by screwing in your LPR too far.
Comes with the o-ring needed to seal the front block to the body.
Available in Polished Raw (needs anodizing before use), Polished Black anodize finish and Matte Black anodized finish.
Photo's on gun or assembled are just for illustration and there are no other parts included.
RAW/UNANODIZED PARTS MUST BE ANODIZED BEFORE USE. Using RAW parts or assembling them without anodizing immediately VOIDS all warranty. RAW Parts are provided only for custom anodizing and not to provide a "silver" finish.
