Delrin Trigger Upgrade

INCEPTION

$29.99 - $39.99
(No reviews yet) Write a Review
SKU:
IFP-TRIGERPLATE-1
Adding to cart… The item has been added
This kit includes:

Empire™ Delrin Trigger Plate


This is a trigger plate for Inception or Empire Resurrection frames that are to be used with an Empire Resurrection body system and front blocks (where the 3-way sits higher). This trigger plate has a shorter three way slot and uses a change in angle on the trigger plate ramp to make a short and snappy trigger pull.

Trigger Return Spring Kit


This is a set of the spring used to push the trigger plate forwards and return the trigger to the resting location. For all Empire and Inception frames or any frame with a 0.1875" or wider trigger slot.
  • Trigger Return Springs, (Soft, Medium and Strong)
  • Trigger Return Spring Guide

Sear Spring Kit


This is the spring that goes under the back of the sear and pushes it up to engage it with the hammer lug.

  • Light
  • Medium Light
  • Medium
  • Heavy
On initial install we recommend using the medium trigger return spring and the medium light sear spring.

These are for Autocockers only. Using this trigger plate with a pump gun that has an Autotrigger will result in premature wear and is not covered by warranty.