A high strength, high viscosity, anaerobic retaining compound used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Locks keys and splines. Eliminates backlash in worn assemblies. Locks bearings in place, preventing spin out. Bonds rotor to shaft in low horsepower motors. Locks bushings and sleeves in housings.
Competes withCompetes with Loctite® 680™ (680 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany)
Key SubstratesMetal
Cure TypeAnaerobic
UNSPSC31200000
FunctionRetaining
Shelf Life2 Years from date of manufacture
Country of OriginUSA
Harmonized Tariff Schedule3506.91
Available Sizes1.8 mL, 10 mL, 50 mL, 250 mL, 1 L, 100pc Fishbowl
Fixture Time (Minutes)30
Full Cure Time24 hrs
Max Gap Fill0.015
Specific Gravity1.1
Specifications MetNSF Non-Food
Temp Range High350°F
Viscosity (cP)1650, 750
ColorGreen
Shear Strength (psi)3200
WarningsNot recommended for use in pure oxygen, or oxygen rich environments.,
