Fully re-buidable WGP Style Ball Detents.
Slightly oversize knurled thumb wheel style body allows easy hand install and the use of an o-ring between the gun body and the thumbwheel to add friction and help prevent the ball detent from backing out.
The stainless steel detent cup can be installed or removed with the use of an allen key to get the depth just right for your gun, and then the anodized aluminium body can be screwed down to lock everything into place.
Comes in polished black and with detent ball and detent spring.
Slightly oversize knurled thumb wheel style body allows easy hand install and the use of an o-ring between the gun body and the thumbwheel to add friction and help prevent the ball detent from backing out.
The stainless steel detent cup can be installed or removed with the use of an allen key to get the depth just right for your gun, and then the anodized aluminium body can be screwed down to lock everything into place.
Comes in polished black and with detent ball and detent spring.
1 Review Hide Reviews Show Reviews
-
Measure ball, then install
This ball Detent is such a perfect design and fit. Over the years, my old nickel ball detent has some torque marks around it on the body which this ball detent cleanly covers (didn't expect that, but very happy about it!) I had to measure the distance required for the delrin ball in the breech, as when fully screwed down into the detent cap first, the ball detent wasn't projecting far enough into the breach to be effective (AKA: Don't fully screw in the silver part first to the cover first before installing on the marker)
